Peripherals

MZ-1D13

High resolution 12″ monochrome video monitor for the MZ-5500 / MZ-5600 series.

CRT 12 inches, 90 deg. deflection
Display
capacity
640 dots horizontally by 400
rasters vertically
Input signal Composite signal of 1 Vp-p
Supply voltage Rated voltage
Power
consumption
29 Watts
Outer
dimensions
313(W) x 289(H) x 327(d)mm
Weight 6.2kg

MZ-1D14

High resolution 12″ color video monitor for the MZ-5500 / MZ-5600 series.

CRT 12 inches, 90 deg. deflection
Display
capacity
640 dots horizontally by 400
rasters vertically
Video input
signal
Independent RGB input of TTL
level with positive polarity
Sync. Input Independent H.V. sync. inputs
of TTL level with negative
polarity
Supply voltage Rated voltage
Power
consumption
63 Watts
Outer
dimensions
326(W) x 288(H) x 375(d)mm
Weight 11kg

MZ-1D18

640 x 400 dots, 15 inch flat square, non-glare semi-black type color display for use with the MZ-5500 / MZ-5600.

Tube used 15 inch, 90 deg. deflection flat
square type (non-glare treated)
Input signal

(Horizontal
synchronization
signal)
(Vertical
synchronization
signal)

R, G, B, three independent TTL
polarity
TTL positive polarity
TTL negative polarity
TTL negative polarity
(Deflection
frequency)
24.86kHz, horizontal, and
55.48kHz, vertical
Display time 29.80µS, horizontal and 16.09
ms, vertical
Resolution 640 dots, horizontal, and 400
dots, vertical
Display colors Seven colors of red, green, blue,
yellow, magenta, cyan,
white, and black
Display
capacity
4000 characters maximum
2000 characters with the MZ-
5500 / 5600
Dot pitch 0.39 mm
Power supply Rated voltage
Physical
dimensions
404(W) x 409(D) x 331(H) mm
Weight 15.0kg
Power
consumption
75 (W)
Input connector Rectangular 8-pin connector
1. Open
2. Video input (red)
3. Video input (green)
4. Video input (blue)
5. Ground
6. Ground
7. Horizontal synchronizing
signal
8. Vertical synchronizing signal
Adjust knob Front POWER switch
Side Vertical synchroniza-
tion, vertical amplitude
horizontal synchroniza-
tion, horizontal phase,
brightness
System
configuration
(Personal computer)
MZ-5600 series
-> (Color display)
MZ-1D18
(Cable attached to the unit)
-> (Tilt stand)
Appearance
color

MZ-1F02

Additional mini-floppy disk drive unit for the MZ-3500 series and MZ-5600 series.
May be used as the 3rd and 4th drives, and has a total storage capacity of 640 kb. Join to the MFD I/F connector on the rear of the System Unit using the dedicated cable MZ-1C33.

Drive Thin-profile, double-sided, double-
density drive ( FD55B ) x 2.
PWB I/F PWB 45 x 129mm ( double-sided
paper epoxy board )
LED PWB 23 x 8.5mm ( single sided
paper epoxy board )
Power supply Switching
regulator
+5V ( 1.3A ) and +12V ( 1.3A )
Contained in a metallic
housing measuring
98(W) x 16.5(H) x 87(D) mm
Cabinet Top and bottom cabinets:
Press-molded metal
Front panel Molded resin
Color Office gray
Dimensions 117.7(W) x 177.7(H) x 331.3(D)mm
Weight 6kg

MZ-1F05

The 8″ floppy disk drive for use with the MZ-3500 series, MZ-5500 series,  and MZ-5600 series.

It has to be interfaced via the exclusively designed MZ-1E11 interface board for the MZ-5500 and MZ-5600. Interfacing cable comes with the MZ-1E11.

Memory
capacity
1.2MB,
formatted
Tracks 77 tracks x 2
Sectors 8 sectors/track
Media 8″ floppy disk
Supply
voltage
100V ( 50 / 60Hz )
Power
consumption
100W
Physical
dimensions
19.5cm wide,
37.5cm deep
22.0cm high
Weight 15.2kg
Color Office gray

MZ-1F10

5.25″, 10.7MB external hard disk drive for use with the MZ-5500 series, MZ-5631 and 5641.

Includes the interface and interfacing cable.

Recording
capacity
10.7MB, formatted
Track
capacity
8.704kb, formatted
Sectors
capacity
512byte, formatted
Sectors per track 17
Disk used 2 disks
Heads 4
Cylinders 317
Revolutions 3600RPM
Data transfer speed 500kb/s, max., between CPU and
controller
Recording density 9260BPI
Recording method MFM
Supply voltage 100V, 50 / 60Hz
Power
consumption
65W
Physical
dimensions
11.8cm wide,
33.1cm deep
18.9cm high
Color Office gray

MZ-1F16

Additional mini-floppy disk drive unit for the MZ-5600 series. May be used as the 3rd and 4th drives, and has a total storage capacity of 1280 kb. Join to the MFD I/F connector on the rear of the System Unit using the dedicated cable
MZ-1C43.

Drive Thin-profile, double-sided, double-
density drive ( FD55F ) x 2.
PWB I/F PWB 45 x 129mm ( double-sided
paper epoxy board )
LED PWB 23 x 8.5mm ( single sided
paper epoxy board )
Power supply Switching
regulator
+5V ( 1.3A ) and +12V ( 1.3A )
Contained in a metallic
housing measuring
98(W) x 16.5(H) x 87(D) mm
Cabinet Top and bottom cabinets:
Press-molded metal
Front panel Molded resin
Color Office gray
Dimensions 117.7(W) x 177.7(H) x 331.3(D)mm
Weight 6kg

MZ-1F18

Expansion hard disk unit option for use with the MZ-5645. Must be directly connected to the hard disk interface provided in the MZ-5645 slot.

Recording
capacity
10.7MB, formatted
Track
capacity
8.704kb, formatted
Sectors
capacity
512byte, formatted
Sectors per track 17
Disk used 2 disks
Heads 4
Cylinders 317
Revolutions 3600RPM
Data transfer speed 500kb/s, max., between CPU and
controller
Recording density 9260BPI
Recording method MFM
Supply voltage 200V, 60Hz
Power
consumption
65W
Physical
dimensions
11.8cm wide,
33.1cm deep
18.9cm high
Color Office gray

MZ-1P02

Model
Print system
Max.
print speed
Character type
Character cell
Max.
columns/row
Max.
paper width/feed method
Copy capacity
MZ-1P02 Dot matrix
impact
printer
120cps
Alpanumeric, and
symbolic, characters
Basic:
9 columns x 9 rows
Character:
9 columns x 7 rows
Standard 80
characters
    • 10 inches/
  • Friction feed
  • Tractor feed (optional
3 copies,
conditional